COOLING TOWER FANS
SVCT manufactures its own Axial Flow Fans for its Cooling Towers. Fan blades are made of either Aluminium Alloy or FRP. Number of Blades, Profile & MoC of blades vary as per design requirement.
Typical Fan range is from 1.50 m to 12 Mtrs,
Cooling Tower Fans can be Divided into Two categories, based on the MoC of the Blade & Hub;
- Aluminum Bladed Fans,
- FRP or Composite Bladed Fans,
Aluminum Bladed Fans – On the basis of the Material & Design of the Centre Hub, Fans are further divided into Three categories,
- Plate Hub Design,
- Cast Iron design,
- Fabricated Pipe Hub Design,
FRP Bladed Fans – On the basis of the Material & Design of the Centre Hub, Fans are further divided into Three categories,
- Plate Hub Design,
- Fabricated Pipe Hub Design,
Some of the various Fan Hubs are shown below
C.I. HUB in a 6 Bladed Aluminium Fan Assembly
Double Plated Hub Used In FRP Bladed Fan Assembly Diameter 2,000 MM To 12,000 MM,
- Easy to Install,
- The clamps offer superb grip on the blades,
- Zero chances of Blade Loosening-up, thus preventing accidents.
Used In Fan Assembly Dia 7315 mm to 10000 mm
One of the most prevalent traditional design, it is Robust & Long Lasting
All our Fans are Statically Balanced at our Ghaziabad Works. Static Balancing ensures Trouble free, vibration free operation at site. MoC of the material used in manufacture, ensures due strength of the material, even after years of operation.
All components are numbered and marked with details to enable easy assembly at site.
Easy Availability of spares is ensured for our esteemed customers.